Reset Your Holosun EPS Carry Red Dot Device

Wiki Article

Need to return your Holosun EPS Carry Red Dot to its factory settings? A simple factory reset can fix a range of problems. Here's how to perform a complete factory reset on your Holosun EPS Carry:

* First, find the minute reset switch on the bottom of your device.

* Use a small object like a matchstick to activate and sustain the reset switch for about 3 seconds.

* You'll likely notice a short indication on the display to confirm that the reset is successful.

* Release the reset lever and your Holosun EPS Carry should now be back to its factory settings.

Returning to Your Holosun EPS Carry to Default Settings

Sometimes your Holosun EPS Carry may need a little reset. This can occur if you've made some modifications and want to go back to the factory settings. Thankfully, it's a pretty straightforward procedure. First, locate the small switch on the rear of your sight. This is the recalibration button. Next, use a small tool like a pen or paperclip to gently depress the switch. Hold it down for approximately 5 seconds until you see the display blink. Release the switch and your Holosun EPS Carry will now be back at its factory defaults.

Hard Reset for the Holosun EPS Carry Red Dot Sight

Performing a factory reset on your Holosun EPS Carry is a straightforward process that will return it to its original settings. This can be helpful if you've made some changes to the sight's configuration and want to start fresh or if you're experiencing any issues.

To factory reset your Holosun EPS Carry, first make sure that the red dot is powered on. Then, press and maintain both the mode button and the power button together for approximately 5 seconds. You will know that the reset has been successful when the red dot blinks rapidly or you hear a confirmation tone.

Once the reset is complete, your Holosun EPS Carry will be back to its factory defaults. This means all custom settings, such as brightness levels and reticle patterns, will have been deleted. You will then need to reconfigure the sight according to your preferences.

Get Back to Basics: Holosun EPS Carry Red Dot Reset

A solid grip on your firearm is paramount, and a reliable red dot sight can significantly improve their accuracy. The Holosun EPS Carry series stands out for its robust build and user-friendly design. However, even the most dependable sights can sometimes become misaligned. This guide will walk you through the straightforward process of resetting your Holosun EPS Carry red dot, more info ensuring it's perfectly aligned for optimal performance.

With a few simple steps and attention to detail, you can keep your Holosun EPS Carry red dot functioning flawlessly. Remember, regular maintenance and calibration are essential for maximizing the accuracy and reliability of any firearm optic.

Return Your Holosun EPS Carry to Factory Settings

Restoring your Red Dot sight to factory settings is a easy process that can be helpful in various situations. If you're experiencing glitches with your EPS Carry or simply want to clear all user-configured settings, following these steps will guide you through the procedure. First, find the reset button on the side of your sight. It's usually a small button. Next, use a small tool to push the reset button and hold it down for 5 seconds. You should see a changing LED indicator, which signifies that the reset is complete. Release the button and your EPS Carry will power off and on automatically. Once it's back online, you can verify that your settings are now at their default values.

Restore to Factory Defaults

In case your Holosun EPS Carry Red Dot isn't functioning as expected, a factory reset can often resolve the issue. To start this process, first locate the small button on the side of your optic. With your fingertip, {press and hold it for a duration of approximately 20 seconds. You'll observe an indication on the viewfinder that confirms the reset is in effect. Once complete, your Holosun EPS Carry Red Dot will be back to its default settings.

Report this wiki page